Sign In / Sign Up To Add Wishlist
Wishlist is available for members only. Please sign in or sign up to add your wishlist.
Support for XV8550D
- "This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- "Sensor module error." message appears on the LCD. What does it mean?
- "Remove Dual Feed module from the machine." message appears on the LCD. What does it mean?
- "OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- "OK to delete the ending point setting?" message appears on the LCD. What does it mean?
- "Failed to save file." message appears on the LCD. What does it mean?
- "An invalid area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
- "An invalid sewing area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
- "Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- "OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- "The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- "The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- "Check and rethread the upper thread." message appears on the LCD. What does it mean?
- "The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- "Use the presser foot lifter button to raise the presser foot." message appears on the LCD. What does it mean?
- "The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- "Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
- "Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- "Make sure embroidery frame is moved as far back as possible. LOCK DOWN THE FRAME-SECURING LEVER." message appears on the LCD. What does it mean?
- "Cannot recognize the fabric edge." message appears on the LCD. What does it mean?
- "There are no enough colors in the thread table, for the selected mode." message appears on the LCD. What does it mean?
- "There are no enough colors in the custom thread table, for the selected mode." message appears on the LCD. What does it mean?
- "This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
- "This key cannot be used at this time." message appears on the LCD. What does it mean?
- "This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
- "This file cannot be used." message appears on the LCD. What does it mean?
- "There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- "The ending point cannot be selected for this stitch." message appears on the LCD. What does it mean?
- "Set the clock." message appears on the LCD. What does it mean?
- "Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?
- "OK to delete the setting?" message appears on the LCD. What does it mean?
- "OK to delete the selected picture?" message appears on the LCD. What does it mean?
- "OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- "Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
- The machine stops and displays error message "Fabric edge is not recognized at this point" while edge sewing though the stitching is not reaching near the edge of the fabric.
- "In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- "The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- "This USB media is incompatible." message appears on the LCD. What does it mean?
- "OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- "OK to move the embroidery carriage to its original position?" message appears on the LCD. What does it mean?
- "Lower the presser foot lever." message appears on the LCD. What does it mean?
- "The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- "USB media error" message appears on the LCD. What does it mean?
- "The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- "This USB media cannot be used." message appears on the LCD. What does it mean?
- "Cannot embroider since the embroidery unit is not attached. Turn off the machine, and then attach the embroidery unit." message appears on the LCD. What does it mean?
- "Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean?
- "The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
- "There is a pattern included that can not be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean and how do I clear it?
- "This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- "When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- "Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- "The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- "The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- "Attach the embroidery frame." message appears on the LCD. What does it mean?
- "Remove the embroidery frame." message appears on the LCD. What does it mean?
- "Change to a larger embroidery frame." message appears on the LCD. What does it mean?
- "The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
- "The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- "Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- "Lower the buttonhole lever." message appears on the LCD. What does it mean?
- "Raise the buttonhole lever." message appears on the LCD. What does it mean?
- "This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- "Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?
- "Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- "No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- "This button does not operate when the embroidery unit is attached." message appears on the LCD. What does it mean?
- "Select a pattern." message appears on the LCD. What does it mean?
- "This embroidery card can not be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- "Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- "Preventive maintenance is recommended" appears on the LCD. Show More Show less
Other FAQs Category
A guide to navigating our most common questions