Sign In / Sign Up To Add Wishlist
Wishlist is available for members only. Please sign in or sign up to add your wishlist.
Support for VQ2400
- "Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- "This USB media is incompatible." message appears on the LCD. What does it mean?
- "The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- "In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- "Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- "This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
- "This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- "This key cannot be used at this time." message appears on the LCD. What does it mean?
- "This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- "This file cannot be used." message appears on the LCD. What does it mean?
- "There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- "The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- "Set the clock." message appears on the LCD. What does it mean?
- "OK to delete the setting?" message appears on the LCD. What does it mean?
- "OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- "Failed to save file." message appears on the LCD. What does it mean?
- "OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- "The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- "A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- "Lower the presser foot lever." message appears on the LCD. What does it mean?
- "The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- "Transmitting by USB" message appears on the LCD. What does it mean?
- "USB media error" message appears on the LCD. What does it mean?
- "The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- "This USB media cannot be used." message appears on the LCD. What does it mean?
- "USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- "When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- "Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- "The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- "The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- "Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- "Lower the buttonhole lever." message appears on the LCD. What does it mean?
- "Raise the buttonhole lever." message appears on the LCD. What does it mean?
- "This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- "The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- "Check and rethread the upper thread." message appears on the LCD. What does it mean?
- "Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- "Preventive maintenance is recommended" appears on the LCD. Show More Show Less
Other FAQs Category
A guide to navigating our most common questions